Epson TM-T20 II User Manual

11
CAUTION: CAUTIONS MUST BE OBSERVED TO AVOID MINOR INJURY TO
YOURSELF, DAMAGE TO YOUR EQUIPMENT, OR LOSS OF DATA.
❏ Do not connect cables in ways other than those mentioned in this manual. Different connections
may cause equipment damage and burning.
❏ Be sure to set this equipment on a firm, stable, horizontal surface. The product may break or cause
injury if it falls.
❏ Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may
cause equipment damage or fire.
❏ Do not place heavy objects on top of this product. Never stand or lean on this product. Equipment
may fall or break, causing damage and possible injury.
❏ Take care not to injure your fingers on the manual cutter
• When you remove printed paper
• When you perform other operations such as loading/replacing roll paper
❏ To ensure safety, unplug this product before leaving it unused for an extended period.
Caution Labels
The caution labels on the product indicate the following precautions.
CAUTION:
❏ Do not touch the thermal head because it can be very hot after printing.

Epson TM-T20 II Specifications

General

Print Method	Thermal line printing
Print Speed	200 mm/sec
Resolution	203 x 203 dpi
Autocutter	Yes
Weight	1.7 kg
Paper Roll Diameter	83 mm
Paper Width	80 mm
Interface	USB, Serial
Dimensions	140 x 199 x 146 mm (W x D x H)
Operating Temperature	5 to 45 °C
Storage Temperature	-10 to 50 °C
Humidity	10 to 90% RH