TM-T81II User’s Manual 7
Connecting the Cables
CAUTION:
For a serial interface, use a null modem cable.
For a USB interface, do not turn on the printer before installing the printer driver.
Always supply power directly from a standard power outlet.
Do not connect to electrical outlets close to devices that generate voltage fluctuations or
electrical noise. In particular, stay clear of devices that use large electric motors.
Never attempt to stretch the cables to enable a connection. The power cable must have adequate
slack at all times during use.
1. Make sure the printer is turned off.
2. Connect the power cord and each interface cable to the connectors on the printer
back. For the shape of each connector, see the illustration below. (Mounted interfaces
vary by the printer model.)
3. Connect the interface cable to the computer.
4. Connect the AC cable to the printer.
USB
RS-232
10BASE-T/
100BASE-TX
To Next Page
Loading...
