Epson TM-T81III - Page 33

33
Chapter 3 Advanced Usage
Auto bottom logo printing
Key-code
Selectable from key-codes of registered logos
Alignment
 Left
 Center
 Right
Extended settings for auto top logo/bottom logo printing
Top logo print while paper feeding to the cutting position
 Disabled (default setting)
 Enabled
Top logo print when printer is powered on
 Disabled (default setting)
 Enabled
Top logo print when roll paper cover is closed
 Disabled
 Enabled (default setting)
Top logo print while clearing the buffer to recover from a recoverable error
 Disabled
 Enabled (default setting)
Top logo print after paper feeding with the Feed button has finished
 Disabled (default setting)
 Enabled
TM-T81III Utility does not support the following settings.
 Top logo print while paper feeding to the cutting position
 Top logo print while clearing the buffer to recover from a recoverable error
 Top logo print after paper feeding with the Feed button has finished