5
Part Names and Functions
Roll paper cover
Open this cover to install/replace the roll paper.
Manual cutter
Use this cutter when you cut the roll paper manually.
Cutter cover
Open this cover to unlock the autocutter blade when the roll paper cover does not
open due to a paper jam. (U “Paper is jammed” on page 16)
Power switch
Use this switch to turn on or off the printer.
Cover open lever
Use this lever to open the roll paper cover.
Control Panel
(Power) LED: This LED is on when the printer is on.
Error LED: This LED indicates an error. (U “Error LED is on” on
page 16 or “Error LED is flashing” on page 16)
Paper LED: This LED is on when the paper is near end or out.
Feed button: This button feeds paper.
Roll paper cover
Cutter cover
Cover open lever
Power switch
Control panel
Manual cutter
To Next Page
Loading...
Need help?
General