Epson TM-T88V Series - Device Settings; Usable Device Specific Settings; Multilingual Font Setting

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88V)
8
2.4 Device Settings
The following explanation is about the settings for TM-T88V models.
2.4.1 Usable Device Specific Settings
For the TM-T88V models, the following
device specific settings are settable by
the SetupPOS utility. For the detail, please refer to the corresponding part of the
Section 2 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT
GUIDE POSPrinter (TM Series)”
Tab Settings
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
*1
Ignore firmware version check
General
Output complete timeout [s]
Paper Type Paper
Paper Width [mm]: LineWidth [dot]: LineCharsList
Bitmap TMFlogo...
Halftone: Method
Halftone: Brightness
Color: Primary
Color Bitmap
Gradation: Method
ERROR
OFFLINE
Log file name (full path name)
Status Log
Maximum file size [KB]
Default Value
*2
Multilingual font
Receipt Characters per Line
Receipt Line Spacing [dots]
Printing Properties
CharacterSet [CodePage Number]
*1
The operations differ by the firmware versions. See the corresponding part of the
section 2 of this manual.
*2
Available only for the Multilingual character model.
2.4.2 Multilingual font Setting
The TM-T88V Multilingual character models support the following font type.
• CHINA
GB18030
• TAIWAN BIG-5
• VIETNAMESE
• THAI 3 PASS
• THAI 1 PASS
The default paper type is set to CHINA GB18030.