3. Select Advanced Connection Mode, and then click OK.
The projector search results are displayed.
4. If the projector you want to connect to is not displayed in the search results, search for it using one of
the following methods.
• Automatic Search: Searches for the projector automatically.
• Manual Search: Searches for the projector based on a specified IP address or projector name.
• Profile: Searches for the projector based on a previously saved profile.
5. Select the projector you want to connect to, and then click Connect.
When Projector Keyword is set to On from the projector, the keyword entry screen is displayed.
6. Enter the keyword displayed on the LAN standby screen, and then click OK.
When the connection is complete, the computer screen is projected. The following EasyMP Network
Projection toolbar is displayed on the computer screen.
30