Event Cause Remedy
ID
0433 Cannot play transferred images. Restart EasyMP Network Projection.
0484 Communication was disconnected from the
computer.
04FE EasyMP Network Projection ended Check the status of network communications.
unexpectedly. Restart the projector.
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same Set the computer, the access point, and the
SSID. projector to the same SSID.
0892 The WPA/WPA2 authentication type does not Check that the wireless LAN security settings
match. are correct.
0893 The WEP/TKIP/AES encryption type does not
match.
0894 Communication was disconnected because Contact your network administrator for more
the projector connected to an unauthorized information.
access point.
0898 Failed to acquire DHCP. Check the DHCP server to see if it is
operating correctly and check the LAN cable
to see if it is connected correctly. If you are
not using DHCP, turn off the DHCP setting.
0899 Other communication errors If restarting the projector or EasyMP Network
Projection does not solve the problem,
contact Epson as described in your projector
User's Guide.
089A The EAP authentication type is not the same. Check that the wireless LAN security settings
are correct. Also, check if the certificate is
089B EAP server authentication failed.
installed correctly.
089C EAP client authentication failed.
089D Key exchange failed.
79