IMPORTANT: DO NOT TURN OFF YOUR PRODUCT OR INTERRUPT THE FIRMWARE SEARCH
PROCESS IN ANY WAY.
7. Follow the on-screen instructions to complete product setup. When you see this screen, click Exit
(Windows) or Close (OS X) to close the installation program.
Parent topic: Setting Up Your Product on a Wireless Network
Setting Up Your Product Using a Temporary USB Connection
Note: The screens shown in these steps may appear in a slightly different order, depending on how your
network is set up.
1. When you see the Know Your Wireless Network screen, click Next (Windows) or Continue (OS X).
2. At the next screen, make sure your product has finished charging the ink, then click Next (Windows)
or Continue (OS X).
26
To Next Page
Loading...
