E
Slide the edge guide until it is flush with the originals.
F
Check that the ADF light in the control panel is on.
Note:
❏ The ADF light may stay off if there is any other original on the scanner glass. If you press x in this case, the
original on the scanner glass will be copied, scanned, or faxed instead of the originals in the ADF.
❏ The ADF light will not turn on when the product is in sleep mode. Press any button other than P to recover from
sleep mode. It may take some time for the light to turn on after recovery from sleep mode.
❏ Be careful not to let any foreign object get inside the hole on the left front corner of the scanner glass. Doing so
may prevent the ADF from operating.
❏ When you use the copy function with the Automatic Document Feeder (ADF), the print settings are fixed at
Reduce/Enlarge - Actual Size, Paper Type - Plain Paper, and Paper Size - A4/Legal. The print is cropped if you
copy an original larger than A4/Legal.
Scanner glass
A
Open the document cover and place your original face-down on the scanner glass.
User’s Guide
Paper and Media Handling
26
To Next Page
Loading...
Need help?
General