EasyManua.ls Logo

Epson WF-8090 - Cleaning the Paper Guide

Epson WF-8090
316 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
190
7. Press OK.
Parent topic: Print Head Alignment
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1. Do one of the following:
If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in
this size: A3 (11.7 × 16.5 inches [297 × 420 mm])
If paper does not feed correctly from the rear paper feed slot, load the cleaning sheet that comes
with genuine Epson paper in the rear paper feed slot.
2. Press the arrow buttons to select Menu and press the OK button.
3. Select Maintenance and press the OK button.
You see this screen:
4. Select Paper Guide Cleaning and press the OK button.
5. Select the paper source you want to clean and press the OK button.
6. Press the up arrow button.
7. If you are cleaning the paper guides, repeat as necessary until the paper comes out clean. If you are
using a cleaning sheet, repeat these steps up to 3 times.
Note: If the paper is not clean after cleaning several times, try cleaning the other paper sources.
Parent topic: Adjusting Print Quality

Table of Contents

Related product manuals