Epson WF-C20600 Series - Operation Check

7. Place a card reader on the cover, and then secure it with double-sided tape if necessary.
c
Important:
Route the connection cable for the authentication device so that it does not interfere with the scanner unit and
control panel.
Operation check
e
following procedures explain how to check the connection status and authentication card recognition for the
authentication device.
❏ MFD’s control panel
Information is displayed if you select Settings > Authentication System > Authentication Device Status.
❏ Web Cong
Status is displayed on the Status tab > Product Status > Card Reader Status.
❏ Conguration Status Sheet
Status is displayed in Hardware
Conguration
> Hardware > Card Reader Status.
See the manual provided with the multi-function device details on how to print a
Conguration
Status Sheet.
Hardware Setup Guide
3. Authentication Device
14