Epson WF-C878RDWF Hardware Setup Guide

3. Authentication Device
If you want to use the authentication device in the authentication system, connect the authentication device with a
USB cable and check that it works.
Mounting the Authentication Device Table
You can attach a stand to the MFD to place the authentication device (optional).
1. Install from the rear of the control panel.
2. Insert the protruding section of the dedicated authentication device platform into the hole on the control
panel.
Hardware Setup Guide
3. Authentication Device
12

Epson WF-C878RDWF Specifications

General

Brand	Epson
Model	WF-C878RDWF
Category	Printer
Language	English