Epson WorkForce 60 - Paper Feed Setup SN 01 H 00 H 00 H

2011/03/02
Revision: 1 Page: 69
6.1.9 Paper Feed Setup "SN" 01H 00H 00H
[Format]
"SN" 01H 00H 00H
[Parameters]
None
[Function]
* Changes the mechanical sequence from the default environment to the values specified by
the below command. If the below command is not sent, the printer selects the plain paper
mechanical sequence.
Item Command
Paper path PP command
Duplex Printing DP command
Color / Monochrome setting ESC (K command
Set Print method ID ESC (m command
Paper types MI command
Platen gap setting US command
Bottom margin setting US command
Check paper size US command
* This command is only valid in remote mode.