EasyManua.ls Logo

Epson XP-241 - Page 131

Epson XP-241
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
131
Light status Condition/solution
The power light is flashing
The paper light is on
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the B&W copy button or the color copy
button to clear the error.
The power light is on or
flashing
The ink light is flashing
Ink in a cartridge is low. You can continue printing, or check which
cartridge is low and replace it.
The power light is on or
flashing
The ink light is on
An ink cartridge is expended or not installed correctly. Replace or
reinstall the cartridge. (Depending on the color of the expended
cartridge and how you are printing, you may be able to continue printing
temporarily.)
The power light is on or
flashing
The ink light is flashing
The paper light is flashing
The ink pads are near the end of their service life. Contact Epson for
support. (To continue printing, press the B&W copy button or the
color copy button.)
The ink light is on
The paper light is on
The WiFi light is on
An error has occurred during firmware updating. Connect your product
using a USB cable and try updating the firmware again. If the error
message continues, contact Epson for support.
The power light is flashing
The ink light is flashing
The paper light is flashing
The WiFi light is flashing
A printer error has occurred. Turn the product off and then back on
again. If the error continues, check for a paper jam. If the error persists,
contact Epson for support.
The WiFi light is flashing
orange
WiFi connection error. Press the Wi-Fi button on the printer to clear the
error and try again.
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.

Table of Contents

Other manuals for Epson XP-241

Related product manuals