2013/12/18
Revision: 1 Page: 14
2.3.2 Printing Area (Zero margin/ Borderless)
The printable areas of various paper sizes on the printer are defined hereafter. Values are expressed in dot units, where 1 dot =
1/360 inch. As is displayed in the following diagram, printable area can be defined as follows:
A’ = the width of the left override area
B’ = the width of the printable area
C’ = the width of the right override area
D’ = the length of the top override area
E’ = the length of the printable area
F’ = the length of the bottom override area
I = the length of the top override area (unprintable area)
Table 3 Printable Area Dimensions (Zero margin/ Borderless)
The printing area is specified by A’, B’, D’, and E’.
1) Only Photo Paper, Matte Paper – Heavyweight, Card are able to achieve margin less printing