Epson XP-410 - Paper Feed Setup SN 01 H 00 H 00 H

2013/12/18
Revision: 1 Page: 70
6.1.9 Paper Feed Setup "SN" 01H 00H 00H
[Format]
"SN" 01H 00H 00H
[Parameters]
None
[Function]
* Changes the mechanical sequence from the default environment to the values specified by
the below command. If the below command is not sent, the printer selects the plain paper
mechanical sequence.
Item
Command
Paper path
PP command
Duplex Printing
DP command
Color / Monochrome setting
ESC (K command
Set Print method ID
ESC (m command
Paper types
MI command
Platen gap setting
US command
Bottom margin setting
US command
Check paper size
US command
* This command is only valid in remote mode.