Epson XP-410 Programming Guide

2013/12/18
Revision: 1 Page: 2
All Rights Reserved. This publication may only be used for the purposes of research and development of
products and services enhancing, enabling, or facilitating existing and future products and services bearing the
EPSON trademark, and for providing support to those engaging or intending to engage in such activities. All
other uses are unauthorized. No part of this publication may be reproduced, stored in any retrieval system, or
transmitted in any form or by any means without the prior written permission of Seiko Epson Corporation for
any purpose other than the authorized users. No patent liability is assumed with respect to the use of the
information contained within. While every precaution has been taken in the preparation of this information,
Seiko Epson Corporation and its affiliates assume no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the information presented within.
EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P 2 is a trademark of SEIKO EPSON
Corporation.
Copyright 2013 by SEIKO EPSON Corporation, Nagano, Japan

Epson XP-410 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	8.7 ISO ppm
ISO print speed color	4.5 ISO ppm

Scan Specifications

optical resolution	1200 dpi
hardware resolution	2400 dpi
maximum resolution	10, 200 x 14, 040 dpi interpolated

Operating Environment

temperature operating	50 ° to 95 °F (10 ° to 35 °C)
temperature storage	-4 ° to 104 °F (-20 ° to 40 °C)
relative humidity operating	20 – 80%

Power

rated voltage	AC 100 – 120 V/220 – 240 V
rated frequency	50 – 60 Hz
rated current	0.5 Amp

Weight and Dimensions

weight	9.0 lb
dimensions printing	15.4" x 20.8" x 11.0"
dimensions storage	15.4" x 11.8" x 5.7"