Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Related concepts
Print Head Cleaning
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Load a few sheets of plain paper in the product.
2. Press the home button, if necessary.
3. Press the left or right arrow buttons to select Setup and press the OK button.
4. Press the up or down arrow buttons to select Maintenance and press the OK button.
You see this screen:
5. Press the arrow buttons to select Head Alignment and press the OK button.
You see this screen:
181
To Next Page
Loading...
