Epson XP-410 User Manual

8. Do the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this book or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
When to Uninstall Your Product Software
Print Head Cleaning
Print Head Alignment
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the home button, if necessary.
2. Press the left or right arrow buttons to select Setup and press the OK button.
192

Epson XP-410 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	8.7 ISO ppm
ISO print speed color	4.5 ISO ppm

Scan Specifications

optical resolution	1200 dpi
hardware resolution	2400 dpi
maximum resolution	10, 200 x 14, 040 dpi interpolated

Operating Environment

temperature operating	50 ° to 95 °F (10 ° to 35 °C)
temperature storage	-4 ° to 104 °F (-20 ° to 40 °C)
relative humidity operating	20 – 80%

Power

rated voltage	AC 100 – 120 V/220 – 240 V
rated frequency	50 – 60 Hz
rated current	0.5 Amp

Weight and Dimensions

weight	9.0 lb
dimensions printing	15.4" x 20.8" x 11.0"
dimensions storage	15.4" x 11.8" x 5.7"