Mac OS X
Connecting the product to a network
For Mac OS X, download the software from the Epson Web site.
Note:
❏ Complete initial settings such as charging ink cartridges and setting the language before starting the network setup.
❏ Check that your network devices such as the router, wireless adapter, or hub are working properly and remove memory
cards from the product before starting the computer setup.
A
If you want to connect to an Ethernet network, connect the product to a hub using a LAN cable.
B
Click the following link and follow the on-screen instructions.
http://epson.sn or http://support.epson.net/setupnavi/
Smartphone or tablet (iOS/Android)
Epson iPrint allows you to wirelessly print and scan to your product from your smartphone or tablet (iOS/Android). If
your product is not connected to a Wi-Fi network, connect the product to a Wi-Fi network manually by using the
product's control panel. For details on manual setup, see “Connecting the Product to a Wi-Fi Network Manually” on
page 12.
Note:
❏ Check that your smartphone or tablet is connected to the network before connecting to the product.
❏ If you want to use a product that only has an Ethernet function from a smartphone or tablet, connect the product to the
wireless router (access point) using a LAN cable.
Using Epson iPrint
A
Download “Epson iPrint” from the App Store (iOS) or Google Play (Android) to your smartphone or tablet.
You can also download Epson iPrint from the following Epson Web site.
http://ipr.to
Network Guide
Using the Product over a Network
11
To Next Page
Loading...
