Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operation Sounds Are Loud
If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
Note:
Depending on the paper type and print quality settings you selected, there may be no dierence in the printer's noise level.
❏ Control Panel
From the home screen, select Quiet Mode, and then enable it.
❏ Wi n d o w s
Enable Quiet Mode on the Main tab in the printer driver.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
Related Information
&
“Menu Options for Printer Setup” on page 86
Cannot Save the Data to a Memory Card
❏ Use a memory card which is supported by the printer.
❏ Check that the memory card is not write protected.
❏ Check that the memory card has enough available memory. If the available memory is low, data cannot be
saved.
Related Information
& “Supported Memory Card Specications” on page 123
Application Is Blocked by a Firewall (for Windows Only)
Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
"?" Is Displayed on the Photo Selection Screen
"?" is displayed on the LCD screen when the image le is not supported by the product.
User's Guide
Solving Problems
119
To Next Page
Loading...
Need help?
General
