Epson XP-435 Series User Manual

❏ Pre-punched paper
Note:
❏ Load a single sheet of paper without binding holes at the top or the bottom.
❏ Adjust the print position of your le to avoid printing over the holes.
4. Slide the edge guide to the edge of the paper, and then close the feeder guard.
5. Check the paper size and paper type settings displayed on the control panel. To use the settings, select
Conrm using the
u or d button, press the OK button, and then go to step 7. To change the settings, select
Change using the
u or d button, press the OK button, and then go to the next step.
c
Important:
e
paper setting screen is not displayed if the paper is not loaded along the right side of the rear paper feed. An
error occurs when you start printing.
Note:
e paper setting screen is not displayed if you have disabled Paper Conguration in the following menus. Go to step 7.
Setup > Printer Setup > Paper Source Settings > Paper
Conguration
6. On the paper size setting screen, select the paper size using the u or d button, and then press the OK button.
On the paper type setting screen, select the paper type in the same way, and then press the OK button.
Conrm the settings, and then press the OK button.
Note:
You can also display the paper size and paper type settings screen by selecting the following menus.
Setup > Printer Setup > Paper Source Settings > Paper Setup
User's Guide
Loading Paper
21

Epson XP-435 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Print Speed (Color)	4.5 ppm
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling	100-sheet input tray
Mobile Printing	Apple AirPrint, Google Cloud Print
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes, 10 x 15 cm, 13 x 18 cm, 16:9
Dimensions	390‎ x 300 x 146 mm (Width x Depth x Height)