Epson XP-442 SERIES - Copying; Copying Basics

Copying
Copying Basics
1. Load paper in the printer.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l or r button, and then press the OK button.
4. Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
l or r button.
6.
Select Print Settings using the
d button, and then press the OK button. Check the settings such as the paper
size and the paper type and change settings if necessary. Select the setting items using the
u or d button and
change settings using the
l or r button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as the
Reduce/Enlarge setting and press the OK button. en specify a percentage using the – or + button. You can change the
percentage in increments of 10% by holding down the – or + button.
7. Press the x button.
Note:
e color, size, and border of the copied image are slightly dierent from the original.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 36
& “Placing Originals on the Scanner Glass” on page 40
& “Menu Options for Copy Mode” on page 72
Menu Options for Copy Mode
Note:
Available menus vary depending on the layout you selected.
The number of copies
Enter the number of copies.
Color
Copies the original in color.
User's Guide
Copying
72