EasyManua.ls Logo

Epson XP-5100 - Network Interface Specifications; Safety and Approvals Specifications

Epson XP-5100
274 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
262
Network Interface Specifications
Wireless LAN standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
Wireless security WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal
WEP (64/128 bit)
Frequency band 2.4 GHz
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Security protocol SSL/TLS
HTTPS Server/Client, IPPS
Maximum radio frequency
power transmitted
19.8 dBm (EIRP)
Parent topic: Technical Specifications
Safety and Approvals Specifications
United States Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
Canada Safety: CAN/CSA C22.2 No. 60950-1
EMC: CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module:
Manufacturer: Askey Computer Corporation.
Type: WLU6320-D69 (RoHS)
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.

Table of Contents

Other manuals for Epson XP-5100

Related product manuals