64
3. Make sure the Paper Configuration setting is set to On.
Note: Disabling this feature turns off the automatic display of the paper settings selection screen
after you load paper in the cassette. If this setting is disabled, you cannot use AirPrint and you
cannot turn on the Paper Mismatch setting.
4. Select Paper Setup.
You see a screen like this:
5. Do one of the following to select your paper settings:
• Select a Paper Size and Paper Type setting.
• Select Favorite Paper Settings to select from a list of saved presets.
Note: You can change your preset settings by highlighting a preset and pressing the right arrow
button.
• Select the icon to change back to your previous paper settings.
Paper Type Settings - Control Panel
Parent topic: Loading Paper
Related tasks
Turning Off the Paper Setting Alert
To Next Page
Loading...
