EasyManua.ls Logo

Epson XP-6000 - Placing a CD;DVD on the Scanner Glass; Copying onto a CD;DVD

Epson XP-6000
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
198
2. Insert the CD/DVD tray into the storage slot on the bottom of cassette 2.
Caution: After printing, handle the CD or DVD carefully. You may need to wait up to 24 hours for the ink
to dry fully before inserting it in a drive, depending on the type of disc you used. Keep printed discs away
from moisture and direct sunlight.
Parent topic: Printing on CDs/DVDs
Placing a CD/DVD on the Scanner Glass
You can place a CD or DVD on the scanner glass and copy the label design onto another CD or DVD.
1. Open the document cover.
2. Place your CD or DVD facedown in the center of the scanner glass.
3. Close the document cover gently to keep your disc in place.
Parent topic: Printing on CDs/DVDs
Copying onto a CD/DVD
You can copy a printed photo or CD/DVD label directly onto an ink jet-printable CD or DVD. If you want,
you can first print a test design on plain paper.
1. Load the CD, DVD, or plain paper you want to print on.
2. Press the home button, if necessary.
3. Select Various prints > Copy to CD/DVD > Copy to CD/DVD and press the OK button.
4. Follow the instructions on the LCD screen to place your original CD, DVD, or photo on the scanner
glass and press the OK button.
5. If necessary, adjust the inner and outer diameter of your CD as shown on the screen, and press the
OK button.

Table of Contents

Related product manuals