EasyManuals Logo

Epson XP-610 Series User Manual

Epson XP-610 Series
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #304 background imageLoading...
Page #304 background image
If you are connecting the product wirelessly via EpsonNet Setup and you do not see the Wi-Fi antenna
icon with connection bars on your LCD screen, make sure your product software was installed
correctly. If necessary, reinstall your software.
Parent topic: Solving Network Problems
Related concepts
When to Uninstall Your Product Software
Cannot Print Over a Network
If you cannot print over a network, try these solutions:
Make sure that your product is turned on.
Make sure you install your product's network software as described in your product documentation.
Print a network status sheet and verify that the network settings are correct. If the network status is
Disconnected, check any cable connections and turn your product off and then on again.
If you are using TCP/IP, make sure the product's IP address is set correctly for your network. If your
network does not assign IP addresses using DHCP, set the IP address manually.
Make sure your computer and product are both using the same wireless network.
If network printing is slow, print a network status sheet and check the signal strength. If it is poor, place
your product closer to your router or access point.
Note: Avoid placing your product near a microwave oven, 2.4 GHz cordless phone, or large metal
object, such as a filing cabinet.
Check your wired LAN router or access point to see if the LED for the port to which your product is
connected is on or flashing . If the link LED is off, try the following:
Make sure the Ethernet cable is securely connected to your product and to your router, access
point, switch, or hub.
Try connecting your product to a different port or a different router, access point, switch, or hub.
Try connecting with a different Ethernet cable.
Try printing to your product from another computer on the network.
If you are connecting the product via EpsonNet Setup and the Wi-Fi icon and signal bars are not
visible on the LCD, make sure your product software was installed correctly. If necessary, reinstall
your software.
Parent topic: Solving Network Problems
304

Table of Contents

Other manuals for Epson XP-610 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson XP-610 Series and is the answer not in the manual?

Epson XP-610 Series Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, Copy, Scan
Max Print Resolution5760 x 1440 dpi
Scan Resolution1200 x 2400 dpi
Automatic Document Feeder (ADF)No
Copy Speed (Black)11 cpm (ISO/IEC 29183)
Copy Resolution600 x 600 dpi
Maximum Scan Area216 mm x 297 mm
Duplex PrintingYes
ConnectivityUSB, Wi-Fi, Wi-Fi Direct, Ethernet
Paper SizesA4, A5, A6, B5
Ink TypeDye Ink
Scanner TypeFlatbed
Memory Card SupportSD, SDHC, SDXC
Mobile PrintingEpson Connect, Apple AirPrint, Google Cloud Print
Paper Capacity100 sheets
Print Speed (Black)13 ISO ppm
Print Speed (Color)10 ISO ppm

Related product manuals