Adjusting CD/DVD Print Position - Windows
If your printed design is not positioned correctly on the disc, you can adjust the print position. First, load
an extra CD/DVD to use for printing test patterns.
1. Open your file in Epson Print CD and click Print.
You see this screen:
2. Select Print Position Confirmation Pattern.
3. Click Print.
4. Remove the disc after printing.
5. Using a metric ruler, measure the distance from the hole to the cross marks labeled Top and Right.
Note: Be sure to measure from the edge of the hole and not the edge of the printable area.
6. Click Print again, then select Adjust Print Position.
You see this screen:
195
To Next Page
Loading...
