Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Press the home button, if necessary.
2. Select Wi-Fi Setup.
You see this screen:
3. Scroll down and select Wi-Fi Direct Routerless Setup.
4. Select Connection Setup.
5. Select Change Password, then select OK.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password.
6. Enter your Wi-Fi Direct password.
Note: Your password must be at least 8 and no more than 22 characters long.
38
To Next Page
Loading...
