Epygi QX50 Installation Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 43
QX50/QX200/QX2000 Manual I: Installation Guide
Fig.I- 33: NAT Traversal – General Settings page
• Go to the SIP Parameters page.
Fig.I- 34: NAT Traversal - SIP Parameters page
Select Use Manual NAT Traversal and enter the WAN IP address of the router into the
Mapped Host text field. For Mapped Port, enter the router's corresponding port number,
in this case 5060. Save the entries.
• Go to the RTP Parameters page and select Use Manual NAT Traversal.

Epygi QX50 Specifications

General

Brand	Epygi
Model	QX50
Category	Network Hardware
Language	English