Epygi QX50 Installation Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 7
QX50/QX200/QX2000 Manual I: Installation Guide
Requirements
• One 100-240 VAC power outlet in close proximity to the QX IP PBX.
• One RJ45 Ethernet 10/100 broadband Internet connection.
• One off-the-shelf analog phone with an RJ11 telephone cable.
• One IP phone with CAT5 cable with RJ45 connector.
• One CAT5 Ethernet cable with RJ45 connector to connect to the QX IP PBX’s LAN port.
• One PC with a 10/100 Mbps Ethernet card.
• TCP/IP network protocol installed on each PC.
• Internet Explorer, Mozilla Firefox, Google Chrome or Opera browser is recommended.

Epygi QX50 Specifications

General

Brand	Epygi
Model	QX50
Category	Network Hardware
Language	English