QX50/QX200/QX2000; (SW Version 6.0.x) 40
QX50/QX200/QX2000 Manual I: Installation Guide
Appendix: Changing the Admin Password
For security reasons, it is recommended that you change the default admin password. The
username of the administrator (admin) cannot be changed.
To change the administrator password, go to the Maintenance - User Rights - Users page.
Fig.I- 30: User Rights page
Choose admin from the list and press the Change Password functional button from the Users
tab.
For Administrator account the page contains two parts - one for GUI Access Password, the
other one for Phone Access Password.
The GUI Access Password offers the following components:
• The Old Password field requires the current password of the Administrator. An
error message prevents entering the wrong password.
• The New Password field requires a new password for the Administrator. Reenter-
ing the new password in the Confirm New Password field will confirm the new
password. The New Password field is checked against its strength and you may see
how strong is the inserted password right below that field. Up to twenty (0-20) di-
gits and symbols are allowed.
Fig.I- 31: Change Password page
The Phone Access Password offers the following components:
• The Old Password field requires the current password of the Administrator. An
error message prevents entering the wrong password.
To Next Page
Loading...
