EasyManuals Logo

Epygi QX50 Installation Guide

Epygi QX50
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
QX50/QX200/QX2000; (SW Version 6.0.x) 46
QX50/QX200/QX2000 Manual I: Installation Guide
Fig.I- 38: SIP Services Add New Extension page
The Authentication password validates the entry and must match the password entered on
the QX IP PBX later. Make sure to record the name, Authentication Password and SIP extension
number for entry into the QX IP PBX later.
Save will store the entered information and conclude the basic SIP registration. The following
page then will be displayed:
Fig.I- 39: SIP Services Your Extension page
This table shows unreg. in the Stat. column. This entry will change to reg. when the required
settings in the QX IP PBX are complete and the QX IP PBX successfully registers on the SIP
Server.
Repeat this for all four extensions on the QX IP PBX and the Auto Attendant.

Other manuals for Epygi QX50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epygi QX50 and is the answer not in the manual?

Epygi QX50 Specifications

General IconGeneral
BrandEpygi
ModelQX50
CategoryNetwork Hardware
LanguageEnglish

Related product manuals