Need help?Do you have a question about the Equinox Systems Swing Batten and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| CRI | >80 |
| Frequency | 50/60Hz |
| IP Rating | IP20 |
| Finish | White |
| LED Type | SMD2835 |
| Beam Angle | 120° |
| Mounting | Surface, Suspended |
| Color Temperature | 3000K, 4000K, 5000K |
| Input Voltage | 220-240V |
| Material | Aluminum |
| Power Supply | Built-in |
| Type | LED Batten |
Essential safety guidelines and warnings for using the equipment safely.
Manufacturer liability, avoid modifications, indoor use only, handle cables carefully.
Temperature fluctuations, product failure, fuse types, qualified technicians, professional use.
Dynamic multi-beam effect with 10W CREE quad-colour LEDs, 4 button menu.
Details power consumption, supply, fuse, dimensions, weight, order code.
Diagram showing numbered parts of the fixture and their labels.
List of items included in the box: fixture, power cable, user manual, clamps.
Setting up DMX address, channel modes (6/12/16), and master/slave configurations.
Operating built-in show modes, sound active mode, and adjusting sound sensitivity.
Controlling LED display, inversion, auto-test, fixture hours, and reset.
Understanding DMX addressing for fixture control and preventing channel overlap.
Explanation of DMX communication, linking fixtures, and data transmission.
Information on required 3-pin XLR connectors and cable daisy-chaining.
Details for 3-pin XLR connectors: Ground, DMX-, and DMX+ signals.
Using a terminator on the last fixture to reduce signal interference and erratic behaviour.
Guidance on using 5-pin XLR connectors in a 3-pin DMX line with adaptors.
Instructions for environmentally safe disposal of electrical and electronic equipment.
To Next Page
