Eraser M700 Series - DECLARATION OF CONFORMITY

2
EU Directive: 2006/95/EC Low Voltage
EC 60204-1 Revision / Edition: 5.1 Chg.: Date:
02/00/09 SAFETY OF MACHINERY - ELECTRICAL
EQUIPMENT OF MACHINES - PART 1: GENERAL
REQUIREMENTS
BS EN 60204-1 Revision / Edition: 06 Chg.: W/
CRGD Date: 05/31/10
Reference Specs
ISO/TR 14121-2:2012 Safety of machinery
-- Risk assessment -- Part 2: Practical guidance
and examples of methods
BS EN ISO 13849-1 Revision / Edition: 09
Chg.: W/ CRGD Date: 08/31/10 SAFETY
OF MACHINERY - SAFETY-RELATED PARTS
OF CONTROL SYSTEMS PART 1: GENERAL
PRINCIPLES FOR DESIGN
BS EN ISO 13849-2 Revision / Edition: 12
Chg.: Date: 10/31/12 SAFETY OF MACHINERY -
SAFETY-RELATED PARTS OF CONTROL SYSTEMS
PART 2: VALIDATION
BS EN ISO 13850 Revision / Edition: 08 Chg.:
Date: 09/30/08 SAFETY OF MACHINERY -
EMERGENCY STOP - PRINCIPLES FOR DESIGN
BS EN ISO 4414 Revision / Edition: 11 Chg.:
Date: 07/31/11 PNEUMATIC FLUID POWER.
GENERAL RULES AND SAFETY REQUIREMENTS
FOR SYSTEMS AND THEIR COMPONENTS
EU Directive: 2006/423/EC Machinery
BS EN ISO 12100 Revision / Edition: 10
Chg.: W/ CRGD Date: 01/31/11 SAFETY OF
MACHINERY - GENERAL PRINCIPLES FOR
DESIGN - RISK ASSESSMENT AND RISK
REDUCTION
Reference Specs
BS EN ISO 13857 Revision / Edition: 08 Chg.:
Date: 04/30/08 SAFETY OF MACHINERY -
SAFETY DISTANCES TO PREVENT HAZARD ZONES
BEING REACHED BY UPPER AND LOWER LIMBS
DIN EN 349 Revision / Edition: 08 Chg.:
CRGD Date: 01/00/09 SAFETY OF MACHINERY
- MINIMUM GAPS TO AVOID CRUSHING OF
PARTS OF THE HUMAN BODY
EU Directive: 2004/108/EC
Electromagnetic Compatibility (EMC)
EN 61000-6-2: 2005-08: Electromagnetic
compatibility (EMC) - part 6-2: Generic
standards: immunity for industrial
environments
EN 61000-6-3: 2007-01, Electromagnetic
compatibility (EMC) - part 6-3: Generic
standards: Emission standard for residential,
commercial and light -industrial environments
Reference Specs
EN 61000-4-2 Electromagnetic compatibility
(EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
EN 61000-4-6 Electromagnetic compatibility
(EMC). Testing and measurement techniques.
Immunity to conducted disturbances, induced
by radio-frequency elds (British Standard)
EN 61000-4-3 Electromagnetic compatibility
(EMC) - Part 4-3 : Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic eld immunity test
EN 61000-4-4 Electromagnetic compatibility
(EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
EN 61000-4-5 ELECTROMAGNETIC
COMPATIBILITY (EMC) - PART 4-5: TESTING
AND MEASUREMENT TECHNIQUES - SURGE
IMMUNITY TEST
EN 61000-4-11 Electromagnetic compatibility
(EMC) - Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations immunity tests”
DECLARATION OF CONFORMITY
We hereby declare that the machine complies with all the relevant specications of the
following EU Directives:
3