Need help?Do you have a question about the Eraser M700 Series and is the answer not in the manual?
General| Brand | Eraser |
|---|---|
| Model | M700 Series |
| Category | Measuring Instruments |
| Language | English |
Symbols used in the manual to convey important instructions or warnings.
Symbols found on machine modules indicating potential hazards or functions.
Overview of the M700 Modular Series as a compact table top system.
Details specifications like material size, feed length, quantity, and tolerances.
Physical dimensions of the Control Module with one or two additional modules.
Specifies the recommended temperature and humidity for operation.
States the system has no minimum intermittent duty cycle limitations.
Details the supported operating modes like Continuous and Single Piece Flow.
Describes the M700 Control Module's function and connectivity.
Lists programmable specs, module dimensions, weight, performance, and job limits.
Details Feed/Cut Parameters, Power, Fuses, and Optional Parts.
Guides on plugging in, powering on, and initial screen display.
Explains how to check the overall status of the modular system and view firmware.
Allows manual material processing by adjusting feed and cut parameters.
Feeds material incrementally for precise positioning or manual cuts.
Performs manual cuts using default parameters and resets length.
Allows setting or changing default feed and cut parameters.
Adjusts the feed length value for the JOG function.
Executes preprogrammed jobs, recommended to do a manual feed/cut first.
Displays status like Running, Paused, or Complete during job execution.
Used to create new or edit existing preprogrammed jobs and batches.
Prompts for supervisor password if security is enabled before editing jobs.
Allows inputting desired length and quantity for a batch within a job.
Adjusts feed rate, feed adjust, cut rate, and cut time for job batches.
Explains Feed Rate, Feed Adjust, Cut Rate, and Cut Time functions and settings.
Allows inputting data for subsequent batches in a job.
Enables/disables password protection and changes the supervisor password.
Sets default parameters for programming new jobs and batches.
Covers module overview, technical specifications, performance, jobs/batches, and parameters.
Lists required, optional, and replacement parts for the Feeder Module.
Guides for bushing installation and module assembly.
Covers belt adjustment, belt replacement, and general care.
To Next Page