18
EBP28
Getting Started . . .
Blower assembly
1. Select the at nozzle (18) or round nozzle (19) for the desired application.
NOTE: Flat nozzle (18) offers higher air speed for more demanding tasks and
for heavier debris. Round nozzle (19) offers greater air volume for general
blowing tasks in a larger area and for lightweight debris.
2. Align the slot of nozzle (18/ 19) with the pin on the S-shaped tube (17). Insert
the S-shaped tube (17) into the nozzle (18/ 19) (Step 1, Fig.1). Turn the S-shaped
tube (17) clockwise until the pin reaches end of the slot (Step 2, Fig. 1).
1
18
19
17
1
2
Before you start
To Next Page
Loading...