27
EBP28
In more detail . . .
4. Pull the recoil starter handle (13) slowly with your left hand until you feel a denite
resistance and then give it a brisk, strong pull. Repeat until the engine attempts to
start but no more than 4 times.
5. Set the choke (8) the OPEN position (Fig. 9).
9
8
6. Pull the recoil starter handle (13) slowly with your left hand until you feel a denite
resistance and then give it a brisk, strong pull. Repeat until the engine starts.
7. Slowly squeeze the throttle trigger (4) to accelerate the engine (Fig. 10). Let the
engine warm up for 1-2 minutes. If the engine stops, repeat above steps.
10
4
Operation