Erbauer EBP28 - Page 28

28
EBP28
In more detail . . .
Engine warm start
1. Set the choke (8) the OPEN position (Fig. 11).
11
8
2. Pull the recoil starter handle (13) slowly with your left hand until you feel a denite
resistance and then give it a brisk, strong pull. Repeat until the engine starts.
NOTE: The machine can be operated with only one hand in blowing mode.
Always hold the main handle (5) with the right hand.
After starting the engine
1. Slowly press down on the throttle trigger (4) to increase the engine speed.
2. For continuous operation, turn the lock-on lever (3) upwards to hold the throttle
trigger (4) down (Fig. 12).
NOTE: The machine can be operated with only one hand in blowing mode.
Always hold the main handle (5) with the right hand.
12
3
4
Operation