29
EBP28
In more detail . . .
3. Check if the fan stops rotating when you release the throttle trigger (4).
Stopping the engine
1. Release the throttle trigger (4) and let the machine run in idle for a while.
2. Push the ignition switch (2) to O position until engine stops.
WARNING! The machine continues to work for some time even after the
engine has been stopped! Wait until it comes to a complete stop before you
put the machine down!
Basic operating
WARNING! Always wear ear protection, eye protection or face shield to avoid
serious personal injury. Do not point the nozzle (18/ 19) in the direction of
people or pets.
WARNING! Always push the ignition switch (2) to O position and let the
engine come to a complete stop before placing the machine down.
NOTE: Do not block the tube or nozzles to avoid engine damage due to over-
revving.
> Walk through the working area and remove any limbs, rocks or other
debris that could become projectiles.
> Before operation, close car and home windows and doors.
> Operate the machine at lowest possible throttle to reduce noise and save
fuel.
Operation
To Next Page
Loading...