Erbauer EBP28 - Page 36

36
EBP28
In more detail . . .
1. Release the throttle trigger (4) and allow the engine to idle.
2. Turn the idle speed screw clockwise using the screwdriver (22) to increase engine
speed if engine stalls or dies in idle mode (Fig. 19).
3. Turn idle speed screw anticlockwise using the screwdriver (22) to decrease engine
speed.
19
22
WARNING! Adjusting the screws L and H must be performed by an authorised
service centre or a similarly qualied person. Using a pac man screwdriver
(not provided) turn the screws L and H to adjust the quantity of fuel in relation
to the air.
Mufer
If it be necessary to modify the mufer, contact an authorised service centre or a
similarly qualied person.
Care and maintenance