37
EBP28
In more detail . . .
Spare parts/Replacement parts
The following parts of this machine may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description Model no. or Specication
Spark plug NGK BPMR7A (Gap of electrodes: 0.6-0.7 mm0.6-0.7 mm) or
other model with same specications
Maintenance
Inspect and maintain this machine regularly based on below maintenance table. Keep
the chain saw in good working condition during maintenance.
Part Task Before/after
each use
Every 10 hours
of operation
Every 25 hours
of operation
Spark plug
check X
clean X
replace whenever necessary
Air lter
check X
clean X
replace whenever necessary
Fuel lter
clean whenever necessary
replace whenever necessary or every 2 years
Tube/ nozzles
check X
clean X
Care and maintenance
To Next Page
Loading...