54
ECSP51
In more detail . . .
Spark plug
NOTE: For good performance, the spark plug must be properly gapped and
free of deposits.
Inspect the spark plug every 25 hours or before long-term storage over 180 days. Clean
or replace with a new one if necessary (type: BPMR7A).
1. Pull the locking lever on the top cover and remove the top cover (6).
2. Disconnect the spark plug connector (6a) (Fig. 48).
3.
Loosen the spark plug anti-clockwise using the multi-tool (24) and remove it carefully.
6a
48
Spark plug
Care and maintenance
To Next Page
Loading...
