Erbauer EHTP22 - Page 18

18
EHTP22
Getting Started . . .
=
100 ml + 2.5 ml =
40:1
200 ml + 5 ml =
300 ml + 7.5 ml =
400 ml + 10 ml =
4. Unscrew and remove the fuel tank cap (15) (Fig. 7).
5. Fill the fuel into the fuel tank (16). Leave approximately 5 mm of space between
the top of the fuel and the inside edge of the tank to allow for expansion. Do not
overll (Fig. 8).
6. Wipe up spilled fuel with a soft cloth. Ret and screw the fuel tank cap (15) rmly
(Fig. 7).
7
15
8
5 mm
16
NOTE: Fuel and oil deteriorate over time. It may be difcult to start the engine
if you use fuel which has been kept for more than 30 days. Towards the end of
the season, it is advisable to put only as much fuel in the tank as you need for
each use, since it should be completely used up before storing the equipment.
Empty remaining fuel from the tank after each use.
Before you start