24
EHTP22
In more detail . . .
Operation
Check before starting:
1. Check the equipment, as well as accessories for damage before each use. Do not
use the equipment if it is damaged or shows wear.
2. Double check that the cutting device (8) is properly xed, tightened and lubricated.
3. Check the fuel level, rell if necessary.
4.
Always hold the equipment by its handles. Keep the handles dry and clean to ensure
proper grip.
5. Ensure that the air vents are unobstructed and clear. Clean them if necessary with
a soft brush. Blocked air vents may lead to overheating and damage the equipment.
6. Wear correct personal protection equipment to protect yourself from hidden objects
that may be thrown from the cutting attachments.
7. Ensure the area to be worked is clear of sticks, wire etc. or other objects that could
damage the equipment.
8.
Stop the engine immediately if you are disturbed while working by other people
entering the working area. Always let the equipment come to complete stop before
putting it down.
9.
Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the equipment.
NOTE: In some countries regulations dene at what time of the day and on what
special days equipments are allowed to be used and what restrictions apply! Ask
your community for detailed information and observe the regulations in order
to preserve a peaceful neighbourhood and avoid committing administrative
offenses!
Operation
To Next Page
Loading...
