14
EHTP22
Getting Started . . .
Your equipment / Before you start
1. Rear handle
2. Throttle control lock-out
3. Throttle control
4. Stop switch
5. Recoil starter handle
6. Front handle
7. Front handle barrier
8. Cutting device
9. Cutter blade
10. Spark plug connector
11. Choke lever
12. Air lter case
13. Locking screw
14. Primer
15. Fuel tank cap
16. Fuel tank
17. Rear handle adjustment lever
18. Rear hand barrier
19.
Multi-tool (Socket wrench/torx-head
screwdriver)
20. Fuel mixing bottle
21. Spanner
22. Flat-head screwdriver
23. Cutting device transport guard
Unpacking
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and protective shipping materials, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you nd
that parts are missing or show damage do not use the equipment and contact your
dealer. Using an incomplete or damaged equipment represents a hazard to operators
and property.
4.
Ensure that you have all the accessories and tools needed for assembly and operation.
This also includes suitable personal protective equipment.
WARNING! The equipment and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
You will need
(items not supplied)
>
Suitable personal protective equipment
> Sharpening set
> Fuel funnel with lter
> Suitable 2-stroke motor oil
> Suitable fuel
> Container to collect fuel
>
Lubricating gun and lubricant for cutting
device
> First aid kit
>
Dry powder re extinguisher readily
available
(items supplied)
>
Multi-tool (Socket wrench/torx-head
screwdriver) (19)
> Fuel mixing bottle (20)
> Spanner (21)
> Flat-head screwdriver (22)
To Next Page
Loading...
