Erbauer EHTP22 - Quick Start; Preparation; Starting Cold Engine

20
EHTP22
Getting Started . . .
Preparation
Assemble Adjust Add fuel and oil mixture
Starting (Cold engine)
1 2
3
4
Press primer
7 times
Set the choke to
CLOSE
Pull recoil starter
handle
3 times
(If engine already
started, skip step 5)
Set the choke to
OPEN
5
6
2
1
7
8
Pull recoil starter
handle until the
engine starts
Squeeze throttle
control lock-out and
throttle control and
release them
Run idle for
1-2 minutes
Operate
Quick start