23
EHTP22
In more detail . . .
Hand barrier
>
The front hand barrier (7) and rear hand barrier (18) prevent the operator from getting
injured by the cutting blades or ying objects (Fig. 9 and 10).
7
18
9 10
Throttle control lock-out
The throttle control lock-out (2) prevents unintentional start of the throttle control (3). The
throttle control can only be activated if the throttle control lock-out is pressed (Fig. 11).
11
2
3
DANGER! Risk of injury! The equipment must only be put into operation if no
faults are found. If any safety equipment is defective, it must be replaced before
the next use.
Equipment functions