Erbauer EHTP22 - Silencer, Spare Parts and Repair; Storage

37
EHTP22
In more detail . . .
Silencer
If it is necessary to replace the silencer, contact an authorised service centre or a
similarly qualied person. Inspect the silencer xing screws regularly. Tighten them if
they are loosened.
Spare parts/Replacement parts
The following parts of this equipment may be replaced by the consumer. Spare parts
are available at an authorised dealer or through our customer service.
Description Model no. or Specication
Spark plug NGK CMR6A
(Gap of electrodes: 0.6-0.7 mm0.6-0.7 mm) or other
model with same specications
Repair
This equipment does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualied person to have it checked
and repaired.
Storage
WARNING! Risk of injury! Make sure that unauthorized persons do not have
access to the equipment!
NOTE: Good storage conditions are important for keeping the equipment
trouble-free.
1. Clean the equipment as described above.
2. Attach transportation guards, if applicable.
3. Store the equipment and its accessories in a dry, frost-free, well-ventilated place.
4. Always store the equipment in a place that is inaccessible to children. The ideal
storage temperature is between 10 and 30 °C.
5. Store the equipment in its bag or cover it with a suitable cloth to protect it against dust.
Short term storage (less than 1 day)
1. Let the equipment cool down before storage.
2. Store the equipment as horizontally as possible. Make sure that no fuel-oil mixture
can run out of the carburetor.
Care and maintenance