7
EHTP22
Getting Started . . .
Emergency
Familiarise yourself with the use of this equipment by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will help
to prevent risks and hazards.
>
Always be alert when using this equipment, so that you can recognise and
handle risks early. Fast intervention can prevent serious injury and damage to
property.
>
Stop the engine and disconnect the spark plug connector if there are
malfunctions. Have the equipment checked by a qualied professional and repaired,
if necessary, before you operate it again.
>
In case of re stop the engine and disconnect the spark plug connector. Take re-
extinguishing measures immediately if the equipment switch is no longer accessible.
WARNING! Never use water to extinguish the equipment on re. Burning
fuel must be extinguished with special extinguishing agents! We recommend
that you keep a suitable re extinguisher within reach in your work area! We
recommend to have dry powder re extinguisher always available.
Residual risks
Even if you are operating this equipment in accordance with all the safety
requirements, potential risks of injury and damage remain. The following dangers
can arise in connection with the structure and design of this equipment:
> Health defects resulting from vibration emission if the equipment is used over long
periods of time or not adequately managed and properly maintained.
>
Injuries and damage to property due to broken application tools or the sudden impact
of hidden objects during use.
> Danger of injury and property damage caused by ying objects.
> Burns, if touching hot surfaces.
WARNING! This equipment produces an electromagnetic eld during operation!
This eld may under some circumstances interfere with active or passive
medical implants! To reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this equipment!
Safety information
To Next Page
Loading...
